User manual

1. Remove the spotlight(s).
2. Loosen the Allen screws on the T-pieces (E) at the ends of the truss and pull the truss o
the stands.
3. Disassemble the truss in the reverse order of the assembly instructions as far as it makes
sense for a transport or storage in view of a new assembly.
4. Pull out the safety bolt on the stand and hold the extension tube while you loosen the
locking screw on the extension tube.
5. Slide the extension tube all the way down and slide the safety bolt through the corre‐
sponding grid hole.
6. Fix the position of the extension tube with the safety bolt on the extension tube.
7. Loosen the safety screw on the slider to which the three feet are attached.
8. Fold up the feet of the tripod.
9. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
SLS300
25