User manual

6.3 Setting up and using the metronome
1. Press [Select] repeatedly until the [Tempo] LED lights up.
ð
The display shows the last selected speed, default value ‘060’ .
2. Press [Metro/Play] to turn the metronome on. The LED of the button ashes along to the
beat, the Click sounds.
3. Use [+] or [–] to select a value between 20 bpm (display ‘020’ ) and 320 bpm (display
‘320’ ) to adjust the metronome speed.
ð
The display shows the set speed.
4. The setting is automatically stored.
1. Press and hold [Metro/Play] while the metronome is enabled to call up the volume set‐
ting mode.
ð
The display shows the last selected volume, default value ‘L20’ .
2. Use [+] or [–] to select a value between 1 (display ‘L-1’ ) and 20 (display ‘L20’ ) to adjust
the metronome volume.
ð
The display shows the set volume.
3. The setting is automatically stored.
Setting the speed
Adjusting the volume
Operating
18
Rookie
E-Drum Module