User manual

Table Of Contents

5.11.3 Importing les

1. Create in the root directory of the USB ash drive (USB stick) a folder named

‘pad_wave’ and store the user samples to be imported as WAV les in it.

Alternatively, use the software ‘Wave Manager’ which is available for down‐

load on the product page of our homepage www.thomann.de to create a le

named ‘pad-content.hppd’ containing the user samples to be imported as WAV

les. Store the le in the root directory of the USB ash drive (USB stick).

2. Press [SETUP] and [OK] simultaneously to enter the USB menu.

The display shows the respective submenus.

Press or to select the menu item ‘LOAD’ .

The display shows the respective submenus.

4. Press [SELECT] repeatedly to switch between submenus.

1 Indicates that a USB ash drive is connected.

2 Shows the memory capacity of the user samples.

3 Imports the user-dened samples, drum kits, and MIDI les.

Conrm the selection with [OK].

Press [SELECT] repeatedly to choose between ‘Cancel’ (cancel import),

‘Cover’ (replace) and ‘Append’ (import) and conrm your selection with

[OK].

4 Imports user-dened settings for the pads.

Conrm the selection with [OK].

Press [SELECT] repeatedly to choose between ‘No’ (cancel import) and

‘Yes’ (import) and conrm your selection with [OK].

5 Imports all user-dened samples and drum kits on the USB ash drive

(USB stick).

Conrm the selection with [OK].

Press [SELECT] repeatedly to choose between ‘Cancel’ (cancel import),

‘Cover’ (replace) and ‘Append’ (import) and conrm your selection with

[OK].

All user samples on the USB ash drive (USB stick) to be imported must meet

the following criteria to be played back on the Sampling Pad without any

problems.

– Sampling rate: 48 kHz, 16 bit, mono

– File name length: max. 16 characters

– Only WAV les can be imported; it is not possible to import MP3 or MIDI

les for the user samples.

#ö

Operating

NonaPad

Sampling Percussion Pad