User manual

5.11.1 User Samples
1. Press [SETUP] and [OK] simultaneously to enter the USB menu.
ð
The display shows the respective submenus.
2.
Press or to select the menu item ‘WAVE’ .
ð
The display shows the user samples imported to the Percussion Pad.
3. Use the rotary control or press [–/+] to switch between the user samples.
4. Press [SELECT] to delete the selected user sample.
ð
The display shows ‘Delete WAVE’
.
5. Press [SELECT] repeatedly to choose between ‘Cancel’ (cancel deletion),
‘Single’ (selected user sample) or ‘All’ (all user samples).
6. Conrm the selection with [OK].
7. To import the user samples to the Percussion Pad, proceed as described under
Ä Chapter 5.11.3 ‘Importing les’ on page 28.
The user samples on the USB ash drive (USB stick) cannot be played
directly from the USB ash drive (USB stick), but must rst be imported into
the Percussion Pad.
5.11.2 MIDI les
1. Press [SETUP] and [OK] simultaneously to enter the USB menu.
ð
The display shows the respective submenus.
2.
Press or to select the menu item ‘MIDI’ .
ð
The display shows any user-dened sound MIDI les on the USB ash drive.
3. Use the rotary control or press [–/+] to switch between MIDI les.
4. To import the user-dened MIDI les to the percussion pad, proceed as
described under Ä Chapter 5.11.3 ‘Importing les’ on page 28.
5. Press [SELECT] to delete the selected MIDI les.
ð
The display shows ‘Delete MIDI’ .
6. Press [SELECT] repeatedly to choose between ‘No’ (cancel deletion) or ‘Yes’
(delete MIDI le).
7. Conrm the selection with [OK].
Operating
NonaPad
27
Sampling Percussion Pad