User manual

Table Of Contents

5.6.1 Eects display structure

1 Shows the currently selected pad.

2 Shows the signal portion that is sent to the FX channel.

Use the rotary control or press [–/+] to change the signal portion. Conrm the

selection with [OK].

3 Shows the 3-band equalizer

Use the rotary control or press [–/+] to switch the equalizer on or o.

With the equalizer switched on, press [SELECT] repeatedly to switch between

the submenus.

‘HIGH’ : Use the rotary control or press [–/+] to adjust the treble from ‘–12 dB’

to ‘12 dB’ . Conrm the selection with [OK].

‘MID’ : Use the rotary control or press [–/+] to adjust the mids from ‘–12 dB’ to

‘12 dB’ . Conrm the selection with [OK].

‘LOW’ : Use the rotary control or press [–/+] to adjust the bass from ‘–12 dB’ to

‘12 dB’ . Conrm the selection with [OK].

4 Shows the reverb.

Use the rotary control or press [–/+] to switch the reverb on or o.

With the reverb switched on, press [SELECT] to enter the submenu.

‘Type’ : Use the rotary control or press [–/+] to select the reverb type ( ‘room’ ,

‘studio’ , ‘stage’ ). Conrm the selection with [OK].

5 Shows the built-in limiter.

Use the rotary control or press [–/+] to switch the limiter on or o.

With the limiter switched on, press [SELECT] to enter the submenu.

‘Threshold’ : Use the rotary control or press [–/+] to adjust the threshold

between 0 dBu (no limiting) and –12 dBu (output = 1/4 of the maximum

output). Conrm the selection with [OK].

Note that all settings aect all pads and external triggers. Only the setting

that you make under the menu item ‘FX Send’ aect the respective pad

exclusively.

5.7 Settings

You can dene additional settings for each individual pad.

Press or to select the ‘ADV’ or ‘ADV2’ menu.

The display shows the respective submenus.

2. Press [SELECT] repeatedly to switch between submenus.

3. Use the rotary control or press [–/+] to change the respectively displayed value.

4. Press [OK] to conrm the new value.

The display shows ‘Save successfully!’ .

Operating

NonaPad

Sampling Percussion Pad