User manual

5.5.2 Recording loops
5.5.2.1 Record display structure
1 Shows the current recording status.
‘START’ : The device is record-enabled.
‘STOP’ : The recording has ended.
Conrm the selection with [OK].
2 Shows the name of the currently selected drum kit to which the currently
edited pad is linked.
Use the rotary control or press [–/+] to change the drum kit.
Conrm the selection with [OK].
3 Shows the selected time signature ( ‘Free’ , ‘*1’ , ‘*2’ , ‘*4’ , ‘*8’ , ‘*16’ )
Use the rotary control or press [–/+] to change the time signature.
Conrm the selection with [OK].
4 Shows the quantizing setting.
Automatically corrects the timing of the strikes ( ‘OFF’ , ‘1/4’ , ‘1/8’ , ‘3/8’ , ‘1/16’ ,
‘3/16’ , ‘1/32’ , ‘1/64’ )
Use the rotary control or press [–/+] to change the quantizing setting.
Conrm the selection with [OK].
5 Shows the correction of the touch velocity.
Use the rotary control or press [–/+] to change the correction of the touch
velocity.
Conrm the selection with [OK].
6 Shows the metronome tempo.
5.5.2.2 Start recording
1. Hit the desired pad for which you want to record a loop.
2. Press [REC] to open the record menu.
3. Press [SELECT] repeatedly to switch between submenus.
4. Use the rotary control or press [–/+] to change the respectively displayed value.
5.
Press or to select ‘START’ .
6. Press [REC] to start recording.
ð
‘RECORD’ is ashing in the display. The metronome is automatically turned
on. To set the metronome according to your requirements, proceed as
described under Ä Chapter 5.9 ‘Metronome’ on page 21.
A maximum of 5000 beats can be recorded per recording. When the max‐
imum is reached, the recording is automatically ended. If you start a new
recording without saving the previous one, the previous recording will be
overwritten. If you switch to another function while recording, the recording
will be discarded.
ö
#
$
%
& '
Operating
16
NonaPad
Sampling Percussion Pad