Assembly instructions
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Notice
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Mounting the toms
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
3 Unpacking
The following guide makes it easy for you to completely assemble your drum set, to
tune it and to set it up properly.
The complete drum set is supplied in two cardboard boxes. It is supplied dismantled
in its individual parts. We recommend that you rst sort the individual parts that
belong together as described below.
The snare drum is supplied assembled and is generally already tuned.
Due to the size of the bass drum, it is always supplied dismantled.
The bass drum includes the following parts:
n 1 drum shell
n 2 hoops
n 2 bass drum heads (1 × resonant and 1 × batter head)
n 12 tension rods (wing screw) with one washer each
n 4 clamping screws (square-head screws) with one washer each
n 16 claw hooks
n 2 bass drum spurs.
Assigning
Snare drum
Bass drum
2 hanging toms
Unpacking
drum set
6