User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Notice
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Mounting the toms
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
8 Assembling the cymbal stands
Fold out or extend the legs of the straight and boom cymbal stands until they are as
stable as possible. After this, you x the legs using the wing nut. The two cymbal
stands are of slightly dierent sizes.
The slightly larger bottom case is intended for the boom cymbal stand. We'll start
with this one rst.
Push the centre and spacer tubes onto the bottom case and x them with the wing
screws. Now push the boom through the joint and x it temporarily with the wing
screw. We will make the nal settings later on.
You mount the straight cymbal stand in a similar way to the boom one. In this case,
however, the cymbal is directly on the retractable spacer tube. You attach the cym‐
bals in exactly the same way as with the hi-hat-stand after positioning.
Assembling the cymbal stands
drum set
16