User manual: FW V1.1.5

Parameter, display Meaning Value range
MIDI NOTE Assigned MIDI note 0…127
SPLASH SENS Touch sensitivity of the Splash trigger. The higher the value, the less sensi‐
tive the trigger responses.
1…6
Curve1 Curve2 Curve3
Dynamics
Volume Volume Volume
Volume Volume Volume
Curve4 Curve5 Curve6
Dynamics Dynamics
Dynamics Dynamics Dynamics
6.10 Utility menu
In this menu, you can change various settings of the device.
1. Press [KIT].
ð
The display shows the kit list.
2.
Press [MENU]. Use the arrow buttons ( / ) to select the option ‘UTILITY’ and
press [ENTER].
ð
The display shows the list of utility parameters.
3.
Use the arrow buttons ( / ) to select the parameter to be changed.
4. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value. Please note the information in the table below.
5. Press [EXIT] to save the changes and to exit the menu.
Parameter, display Meaning Value range
GM MODE Denes the processing of programme change commands: ON: Programme
change commands for MIDI channel 10 are processed as selection (GM kit).
OFF: Programme change commands for MIDI channel 10 are processed as
selection (local kit).
ON, OFF
LOCAL CTRL ON: Drum module and MIDI sound are present at the output. OFF: Drum
module is muted, only MIDI sound.
ON, OFF
L-R EXCHANG Allows to switch from left-handed to right-handed conguration of the
entire set without having to change the wiring.
ON, OFF
AUTO POWER Denes the behaviour of the automatic shuto:
n ‘30’ (automatic shuto after 30 minutes)
n ‘60’
(automatic shuto after 60 minutes)
n ‘OFF’ (automatic shutdown o).
30, 60, OFF
Adjusting device settings
Operating
22
MPS-850
E-Drum Module