User manual: FW V1.1.5

6.6 Metronome function

Press [CLICK] to turn the click function on and o again. When the Click is running the

indicator LED of the button is ashing.

Use the arrow buttons ( / ) to select the parameter to be changed.

2. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter

value.

All changes are immediately eective. Exit the Settings menu by pressing [CLICK]

again.

Parameter, display Meaning Value range

TIME SIGNATURE Emphasis on beats 0 … 9/2, 0 … 9/4, 0 … 9/8, 0 … 9/16

VOLUME Click volume 0 … 16

INTERVAL Beats per measure 1/2, 3/8, 1/4, 1/8, 1/12, 1/16

NAME Name and number of the corresponding Click

voice

METRO, CLAVES, STICKS, COWBELL, CLICK, VOICE

OUTPUT Click output for headphones only or also for the

line output

PHONES, ALL (PHONES+OUTPUT)

The click volume is also inuenced by the fader [RIDE/CLICK]. The click is only audible

if this fader is not set to zero.

1. Press [TEMPO].

2. Use the arrow buttons ([<] / [>]) or the jog wheel to change the click tempo.

3. Conrm with [ENTER] or wait three seconds to reactivate the originally set

tempo.

6.7 Fader

The drum module oers six separate faders that can be used to directly adjust the

volume of individual pads, the song, or the click. The faders have double assignment.

To change from one assignment to another, press [FADER]. The two control LEDs next

to the faders indicate which assignment is currently set.

Fader label Assignment 1 Assignment 2

[KICK] Kick drum –

[SNARE] Snare –

[TOM] Tom 1, 2, 3, 4 –

[HI-HAT] Hi-hat Drum module

Settings

Changing the tempo

Operating

MPS-850

E-Drum Module