User manual: FW V1.1.5

Voice parameters always refer only to a single pad. For example, if you change the
volume of the snare drum, the other pads are not aected.
1. Press [KIT].
ð
The display shows the kit list.
2.
Press [MENU]. Use the arrow buttons ( / ) to select the option ‘VOICE’ and
press [ENTER].
ð
The display shows the voice list.
3. Use the arrow buttons ([<] / [>]) or the jog wheel to select the pad or play the
pad whose parameters you want to adjust.
4.
Use the arrow buttons ( / ) to select the parameter to be changed.
5. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Parameter, display Meaning Value range
TRIGGER Trigger KICK, SNARE, SN-R, TOM1, T1-R…
VOICE NAME Voice assigned to the trigger. The voices U01…
U99 can be loaded from a USB stick.
1 … 550, U01…U99
VOLUME Volume 0…16
PAN Trigger position within the stereo signal (pan‐
orama right / left)
–8…8
PITCH Pitch –8…8
REVERB Reverb 0…16
DECAY Decay –5…0
PAD SONG Pattern, Style 1 … 100, O
The existing preset kits can be used as a basis for user kits. The user kits can then be
stored in the device memory.
1. Press [SAVE].
ð
‘Rename Kit’ and the number and name of the rst user kit appear on the
display.
2. Change the name as desired. You change the letter on which the cursor is cur‐
rently located with the jog wheel, you move the cursor with the arrow keys
([<] / [>]).
3. To save, select the option ‘SAVE’ . To cancel, select the option ‘CANCEL’ .
4. Use the arrow buttons ([<] / [>]) or the jog wheel to select a user kit. Press
[ENTER].
ð
The display briey shows ‘SAVE OK!’ . The changes to the settings take
immediately eect.
Any unsaved changes will be discarded when selecting another kit or the
device is turned o.
Customising Voice parameters
Customising and storing user kits
Operating
MPS-850
17
E-Drum Module