User manual: FW V1.1.5

n Hi-hat
With the Hi-hat we distinguish between Hi-hat pedal change, open Hi-Hat,
closed Hi-hat, Hi-hat pedal and Splash.
– Hi-hat pedal change
When the pedal is pressed in dierent positions, the voice changes when hit‐
ting the Hi-hat pad (similar to an acoustic drum kit).
– Open Hi-hat
Strike the Hi-hat pad without pressing the pedal.
– Closed Hi-hat
Strike the Hi-hat pad with fully pressed pedal.
– Hi-Hat pedal
Press the Hi-hat controller pedal to generate a closed sound without striking
the Hi-hat pad.
– Splash
Play the Hi-hat with fully pressed pedal and then open it suddenly.
6.4 Modifying drum kits
1. Press [KIT].
ð
The display shows the kit list.
2. Press [KIT] again to go to the User Kits section.
You can assign a special sound to each individual trigger of the drum kit and set mul‐
tiple sound parameters.
1. Select the desired drum kit with the arrow buttons ([<] / [>]). The selected
drum kit is immediately active.
2.
Use the arrow buttons ( / ) to select the parameter to be changed.
3. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Parameter, display Meaning Value range
KIT NAME Drum kit selection Preset: 1 … 30
User: 31 … 50
VOLUME Volume of the pads of the drum kit 0 … 16
EQ HIGH Boost / cut of the high EQ frequencies –12 dB…12 dB
EQ MID Boost / cut of the mid EQ frequencies –12 dB…12 dB
EQ LOW Boost / cut of the low EQ frequencies –12 dB…12 dB
Selecting a drum kit
Customising a drum kit
Operating
16
MPS-850
E-Drum Module