User manual: FW V1.1.5

6 Operating
6.1 Functions
Check all cable connections for correct t before turning on
Before switching on, turn the [VOLUME – MASTER] control to minimum.
Switch the drum module on or o with the main switch [POWER].
If the device is not in use, it shuts o automatically after a settable time.
To disable the automatic shutdown, use the Utility menu ( Ä Chapter 6.10 ‘Utility
menu’ on page 22).
To set the desired total volume for the Drum Set, turn the [VOLUME – MASTER] con‐
trol.
To reset the entire drum module to factory settings, turn it o rst. Then hold down
the [<] and [>] simultaneously and additionally press [POWER] until the display shows
‘Factory Resetting…’ .
6.2 Selecting and adjusting drum kits
A drum kit is a compilation in which a certain sound (Voice) and several sound
parameters are assigned to each pad. Selecting dierent drum kits lets you customise
the sound of your drum kit in seconds to the desired music genre. Besides the 30 pre‐
programmed drum kits you can also create, customise and save 20 user drum kits.
To select a certain drum kit, proceed as follows:
1. Press [KIT].
ð
The display shows the kit list.
2. Use the arrow buttons ([<] / [>]) or the jog wheel to select the desired kit.
The setting is automatically stored.
Turning on / o
Automatic shuto
Adjusting the volume
Reset to factory defaults
Selecting a drum kit
Operating
14
MPS-850
E-Drum Module