User manual: FW V1.1.5

4 Installation
Setup and assembly of the pads and pedals are described in detail in the enclosed
assembly guide. Finally check that all cables between the pads and the e-drum
module have been properly connected.
Use the Y cable to connect the supplied power adapter to the [9 V] port of the e-
drum module and the hi-hat controller. Then plug the mains plug into the socket.
Connect your stereo headphones to the [PHONES] output of the drum module.
Connect the inputs of your amplier or active monitors to the [OUTPUT] sockets of
the drum module. If you use a mono amplier, connect its input to the [L/MONO]
output socket of the module.
Connect a CD or MP3 player to the input socket [AUX IN] IN of the drum module.
Connect external MIDI devices to the [MIDI OUT] or [MIDI IN] socket of the drum
module.
Connect external MIDI devices or your computer to the USB port [USB MIDI] of the
drum module.
Setup, connecting pads and pedals
Connecting the power adapter
Connecting headphones
Connecting audio devices
Connecting a CD or MP3 player
Connecting MIDI devices
Connecting USB devices
Installation
10
MPS-850
E-Drum Module