User manual: FW V4.14

Parameter Function
FX SET Fader function preset. Make the following settings either directly with the fader or use the buttons [PAGE UP]/
[PAGE DOWN]:
Reverb Type Reverb preset (eect type), fader S1.
Dist.Pst Distortion preset (eect type).
Threshold Compressor threshold preset, fader S2.
LowFrq Preset for low frequency control range, fader S3.
LoMiFrq Preset for low mid frequency control range, fader S4.
HiMiFrq Preset for high mid frequency control range, fader S5.
HiFrq Preset for high frequency control range, fader S6.
MIDI SET Assignment of faders S1 … S6 to the MIDI controllers.
ADVANCED Pad or trigger parameter preset:
Sensitivity The touch sensitivity regulates the volume behaviour of a pad regardless of the actual strike
intensity. The higher the value, the higher the volume when playing, and vice versa.
Headroom This parameter is used to preset the level reserve between normal and maximum level when
playing the pads.
SenseTime Presetting the minimum time interval between two signals from the same trigger prevents
unwanted sound overlays by vibrations.
Operating
30
MPS-750X
E-Drum Module