User manual: FW V4.14

The function of faders S1 … S6 of the drum module depends on the selected operating mode.

Use [ALTER] to toggle between VOL, FX and MIDI. The control LED of the activated operating

mode lights up.

Operating mode Fader function

VOL Volume control for the assigned pad.

FX Fader S1: Reverb control

Fader S2: Compression control

Fader S3 … S6: 4-Band-EQ controls

MIDI In MIDI operation, each fader S1 … S6 is assigned to one controller, the

function is specied in the settings of the installed DAW.

If you have set one of the faders to a certain value in one of the operating modes and

then repeatedly change the operating mode you rst have to slide the fader over the

previously set value in the initial mode.

Example: If you set fader S1 in VOL mode to value ‘127’ , then change to FX mode and

set the fader to ‘0’ , then change back to VOL mode, you rst have to set the fader

back to value ‘127’ to get a response.

» Continued on the next page

Mixer function

Operating

MPS-750X

E-Drum Module