Assembly instructions

Mounting the drum module on the rack
1. Put the drum module (21) up to the stop into the free bracket of the left crossbeam (5). Insert the D-sub plug of the multiple
cable (22) into the provided socket on the bottom side of the drum module.
2. Tighten the D-sub plug with the hand screws.
3. Align the module and tighten the wing nut of the bracket.
Bass Drum positioning
Place the pedal with the bass drum pad centred under the rack. Position the bass drum pedal centred in front of the pad.
Set-up and cabling
Set up the rack, the pads and the cymbals according to your needs. Finally, position the pedal with the bass drum pad in front of
the rack and connect all trigger cables to the e-drum module.
The skin tension of the mesh heads is relatively low in the delivery state in order to avoid damage during transport. For good playa‐
bility and better trigger behaviour, adjust the skin tension to your playing habits.
Assembly
16
MPS-750X
E-Drum Set