Assembly instructions

Mounting the Hi-hat on the rack
4
5
-
1. Screw on the wing nuts of the hi-hat tripod with pedal (19) and open the feet. Then tighten the wing nuts of the brackets.
2. Insert the hi-hat holder (20) into the hi-hat tripod with pedal (19) and tighten the holder clockwise.
3. Unscrew the wing nuts from the Hi-hat holder (20) and take the felt washers o the holders.
4. Place the Hi-hat (12) as shown in the gure on the holder.
5. Place the felt washers on the cymbals and x the Hi-hat (12) with the associated wing nut on the holder.
Setting up the bass drum pedal
3
2
1. Screw the bass drum pad and the associated foot (17) with the supplied screws using the drum key (23).
2. Engage the bolt of the foot machine (18) into the provided recess on the bass drum pad (17).
Assembly
MPS-750X
15
E-Drum Set