User manual

6.4 Modifying drum kits
Drum kits 1 … 30 are preset. You can change the preset kits and save them as User
kits 31 … 40.
1. Press [KIT/VOICE].
ð
The Kit menu is displayed.
2. Press [PAGE] repeatedly until the desired sub menu ‘KIT NAME’ or ‘VOLUME’ is
displayed.
3. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Param‐
eter
Display Meaning Value range
KIT NAME NUM XXX Drum kit selection Preset: 1 … 30
User: 31 … 40
VOLUME VOL XXX Volume of the pads of the drum
kit
0 … 127
Volume
Changing the volume of a particular drum kit aects all pads.
Voice parameters always refer only to a single pad. For example, if you change the
volume of the snare drum, the other pads are not aected.
1. Hold down [KIT/VOICE] for about 2 seconds.
ð
The current Voice name and Voice number are displayed.
2. Strike the pad whose Voice you want to change.
ð
The name of the current pad is displayed.
3. Press [PAGE] repeatedly until the desired sub menu ‘VOICE NAME’ or ‘VOLUME’
is displayed.
4. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Param‐
eter
Display Meaning Value range
TRIGGER KIK, Sn, SnR, T1,
T2, T3, T4, HH, C1,
C2, Rd, Pd, PS
Trigger KICK, SNARE,
Snare Rim, Tom
1, Tom 2, Tom 3,
Tom 4, Hi-hat,
Crash 1, Crash 2,
Ride, Hi-hat
Pedal, Hi-hat
Splash
VOICE
NAME
NUM XXX Voice assigned to the trigger 1 … 408
VOLUME VOL XXX Volume 0…127
Customising a drum kit
Customising Voice parameters
Operating
MPS-450
15
E-Drum Module