Assembly instructions
Table Of Contents
Setting up the bass drum pedal
1
3
2
1. Engage the bolt of the foot machine (17) into the provided recess on the bass drum pad (16).
2. Place the beater (18) into the hole provided on the rotary head of the pedal (16) and tighten the fastening screw with the
drum key (23).
Aligning the beater
Pay attention to the correct orientation of the beater. The beater may only hit the bass drum pad with the black plastic side. Using
the felt side will accelerate the abrasion of the mesh head and may cause the break.
The bass drum beater can be rotated by 180 degrees by loosening the locking screw.
Mounting the drum module on the rack
5
(
:
:
6
1. Insert the D-sub plug of the multiple cable (21) into the provided socket on the bottom side of the drum module.
2. Tighten the D-sub plug with the hand screws (25).
3. Put the drum module (20) up to the stop into the free bracket of the left crossbeam (7).
4. Align the module and tighten the wing nut of the bracket.
Position bass drum and hi-hat pedal
1. Place the pedal with the bass drum pad centred under the rack. Position the bass drum pedal centred in front of the pad.
2. Place the Hi-hat pedal left of the bass drum pad.
Assembly
12
MPS-450
E-Drum Set