Assembly instructions

Mounting cymbals on the rack
+
.
1. Unscrew the wing nuts from the cymbal holders (10) and take the felt washers o the holders.
2. Place the cymbals (13) as shown in the gure on the holders. Be sure to attach the crash pad (10 inch) to the left holder and
the ride pad (12 inch) to the right cymbal holder.
3. Place the felt washers on the cymbals (13) and x the cymbals with the associated wing nuts on the holders.
Mounting the Hi-hat on the rack
,
-
1. Unscrew the wing nuts from the Hi-hat holder (11) and take the felt washers o the holders.
2. Place the Hi-hat (12) as shown in the gure on the holder.
3. Place the felt washers on the cymbals and x the Hi-hat (12) with the associated wing nut on the holder.
Assembly
MPS-450
11
E-Drum Set