Assembly instructions

3. Then tighten the mounting screws with the drum key (23).
+ +
,
1. Insert the brackets (10, 11) for the cymbals (Crash, Ride) and the Hi-hat into the provided mounting clamps on the rack.
Fasten the brackets using the mounting screws at the desired height.
2. Loosen the retaining screws on the bracket joints and turn the brackets into the desired playing positions. Then retighten
the locating screws rmly.
Mounting pads on the rack
7
1. Slide the plastic ends of the mounting brackets (22) up to the stop into the designated clamps on the rack. Then tighten the
wing nuts on the clamps by hand.
2. Attach pads (14, 15) to the mounting brackets (22) and hand-tighten the wing nuts of the pads.
3. Align the pads on the rack to meet your needs, then tighten the wing nuts of the brackets and the wing nuts of the pads
evenly.
Assembly
10
MPS-450
E-Drum Set