Assembly Instructions MPS-450 E-Drum Set
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 27.06.
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 5 2 Scope of delivery.............................................................................................................................................................................................................. 6 3 Assembly......
MPS-450 E-Drum Set
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
Scope of delivery 2 Scope of delivery Before you assemble your drum set, make sure the contents of package is complete according to the following list and figure. Item Qty.
Scope of delivery ö # $ % & + , ' (2 ×) ( ) * - .
Assembly 3 Assembly Overview Loosen the screws of the clamps before sticking the tubes together. Mount the various elements in the specified sequence. The final positions of the components are shown in the illustration below. . .
Assembly Assembling the rack CAUTION! Danger of cuts on hands and fingers When connecting the parts, take care for sharp edges on the metal tubes, screws etc. & 8 ' ö 1. Attach the horizontal connection tubes (5, 6) to the lateral support tubes (1, 2). 2. Then tighten the mounting screws with the drum key (23). ) ( 8 $ # * % 1. Attach the three side crossbeams of the rack (7, 8, 9) in the provided mounting clamps. 2.
Assembly 3. Then tighten the mounting screws with the drum key (23). + + , 1. Insert the brackets (10, 11) for the cymbals (Crash, Ride) and the Hi-hat into the provided mounting clamps on the rack. Fasten the brackets using the mounting screws at the desired height. 2. Loosen the retaining screws on the bracket joints and turn the brackets into the desired playing positions. Then retighten the locating screws firmly. Mounting pads on the rack 7 1.
Assembly Mounting cymbals on the rack . + 1. Unscrew the wing nuts from the cymbal holders (10) and take the felt washers off the holders. 2. Place the cymbals (13) as shown in the figure on the holders. Be sure to attach the crash pad (10 inch) to the left holder and the ride pad (12 inch) to the right cymbal holder. 3. Place the felt washers on the cymbals (13) and fix the cymbals with the associated wing nuts on the holders. Mounting the Hi-hat on the rack , 1.
Assembly Setting up the bass drum pedal 1 3 2 1. Engage the bolt of the foot machine (17) into the provided recess on the bass drum pad (16). 2. Place the beater (18) into the hole provided on the rotary head of the pedal (16) and tighten the fastening screw with the drum key (23). Aligning the beater Pay attention to the correct orientation of the beater. The beater may only hit the bass drum pad with the black plastic side.
Assembly Set-up and cabling Set up the rack, the pads and the cymbals according to your needs. Finally, position the pedal with the bass drum pad and the Hihat pedal in front of the rack and connect all trigger cables to the e-drum module.
Protecting the environment 4 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
