User manual

To programme a certain Voice for a pad, proceed as follows:
1. Press [MODE] repeatedly until the [VOICE] LED lights up.
2. Hit the respective pad to activate it.
ð
The display shows the number of the currently assigned Voice.
3. Select the desired Voice using [–]/[+] (see ).
The setting is automatically stored.
Only Voices from group 1 – group 4 can be assigned to a Hi-Hat. The display shows
‘H-I’ .
You have the option to adjust the volume of each voice independently. To do so proceed as
follows:
1. Press [MODE] repeatedly until the [VOICE] LED lights up.
2. Hit the respective pad to activate it.
ð
The Voice volume appears in ‘Lxx’ format on the display.
3. Adjust the volume using [–] and [+] (setting range: 0 to 32).
The setting is automatically stored.
Assigning a Voice
Adjusting Voice volume
Operating
26
MPS-150X
E-Drum Module