Assembly Instructions MPS-150X E-Drum Set
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 27.06.
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 5 2 Scope of delivery.............................................................................................................................................................................................................. 6 3 Assembly......
MPS-150X E-Drum Set
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
Scope of delivery 2 Scope of delivery Before you assemble your drum set, make sure the contents of package is complete according to the following list.
Assembly 3 Assembly Overview Loosen the screws of the clamps before sticking the tubes together. Mount the various elements in the specified sequence. The positions of the pads, cymbals, etc. are shown in the illustration below.
Assembly Assembling the rack CAUTION! Danger of cuts on hands and fingers When connecting the parts, take care for sharp edges on the metal tubes, screws etc. % % & % $ & & $ $ ö # 1 Align the mounting brackets for the connecting pipe and the two side arms of the rack in terms of height and desired playing position. Insert the connecting pipe and the two sides arms into the brackets and then tighten all mounting screws. The left side arm is longer than the right one.
Assembly Mounting pads on the rack 1. Attach the supplied L-pieces to the pads. Tighten the wing nuts on the pads by hand first. 2. Then slide the L-pieces up to the stop into the designated clamps on the rack. 3. Align the pads on the rack to meet your needs and tighten the wing nuts of the pad brackets and the bolts of the pad clamps on the rack firmly and evenly. Mounting cymbals on the rack 1. Put the three cymbal holders as shown into the designated clamps on the rack. 2.
Assembly Setting up the bass drum pedal 3 1. Snap the two metal rods into the holes provided on the frame of the bass drum pedal. 2. Place the beater into the hole provided on the rotary head of the pedal and tighten the clamp with the drum key. Bass drum and Hi-hat 1. Place the bass drum pad centred under the rack. Position the drum pedal centred in front of the pad. 2. Place the Hi-hat pedal left of the bass drum pad.
Protecting the environment 4 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 12 MPS-150X E-Drum Set
Notes MPS-150X E-Drum Set 13
Notes 14 MPS-150X E-Drum Set
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
