User manual

1.
Use | to select a song.
ð
The standard values for tempo and time signature are read out and trans‐
ferred to the metronome.
2. Switch between songs to change back to the standard tempo value.
3.
Use / to start or pause a song.
6.2 ‘EDIT’ menu
The pre-programmed sounds of the drum module can be freely programmed to the
connected pads, i.e. you can create your own drum kits and save them in the device.
1 Main menu
2 Parameter
3 Trigger
4 Values
5 Scroll bar
1. Select one of the available drum kits and use [EDIT] to switch to Edit mode.
2.
Hit the trigger whose sound you want to edit, or select it with | .
ð
The display shows the corresponding name at the bottom right.
3.
Press / to view the values for the set sound.
4.
Use / to select a parameter.
ð
The selected parameter appears in red.
5. Change the value with the rotary control or with [–] | [+].
6. Press [–] | [+] simultaneously to restore the value set before the change.
7.
Some parameters have submenus. In this case, is displayed to the right of
the value. Press [ENTER] to switch to the submenu.
ð
Details on the respective parameter are displayed.
8. Press [EXIT] to exit the menu.
ð
A dialogue appears on the display.
9. Use the rotary control or [–] | [+] to select the target kit and conrm with
[ENTER] to save the changes. Or press [EXIT] to exit the menu without changes.
The following parameters can be changed with the rotary control or with [–] | [+]:
Playing songs
Customising a drum kit
$%
ö #
&
Operating
MPS-1000
17
E-Drum Module