User manual

7 Pad volume
Use the faders in the [VOLUME MIXER] zone to adjust the volume of each indi‐
vidual pad.
The volume set with the faders is not saved for the respective drum kit.
1. Press [TEMPO].
ð
The tempo value in the lower right corner of the display appears in red.
2. Change the tempo with the rotary control or with [–] | [+] or press [TEMPO]
repeatedly until the desired tempo is reached.
3. Wait a few seconds without making any further changes or press [EXIT] to exit
the menu.
1.
Press to turn the Metronome on.
ð
The metronome clicks at the set tempo. Tempo and time signature are
shown in the lower right corner of the display.
When a song is playing or paused, the display shows the tempo and time
signature of the current song.
2. Wait a few seconds or press [EXIT] to exit the menu.
ð
The display now shows the standard values for tempo and time signature
again, which you can set in the ‘SETUP’ menu.
3.
Press to turn the Metronome o.
The drum module oers the possibility of recording up to 15 of your own songs.
1.
Press to activate the recording mode.
ð
The display shows ‘STANDBY’ at the bottom left.
2.
Set the tempo and press to start recording
or press / to record the current song. The set tempo is applied
or hit any pad to start recording straight away.
ð
If you do not start recording by hitting a pad, countdown beats will sound.
3.
Use [EXIT], or / to stop the recording.
4. Use the rotary control or [–] | [+] to specify a memory location. Existing data
will be overwritten.
5. Conrm with [ENTER] or cancel saving with [EXIT].
Changing pad volume
(
Changing the tempo
Turning the metronome on and o
Recording function
Operating
16
MPS-1000
E-Drum Module