User manual

Press [NOTE], to open the menu VOICE.
The control LED of the button lights up and the three-digit LED display shows the currently
assigned MIDI note. Now you can assign any MIDI note using the [SELECT –/+] buttons.
Press [SAVE], to open the menu SAVE. You can now assign the current settings to a user kit
number using the [SELECT –/+] buttons. During this process the display value ashes on the
three-digit LED display.
Press the [SAVE] button again to store the setting. When this is nished successfully, the user
kit is automatically activated via the kit menu.
If an error occurs, the three-digit LED display shows
E r r
.
Any unsaved changes will be discarded by the selection of another kit.
Assign a MIDI note
Saving a kit
Operating
MD-90
23
Mobile Drum