User manual

6 Operating
Turn on/o the device using the main switch on the rear panel.
The unit automatically switches to standby mode when you don't press any key or strike any
pad for about 30 minutes. To turn the device on again after an automatic shutdown, press the
main switch.
Upon switching on, the device activates the KIT menu by default. The default value is ‘001’ .
Press [KIT] to enter the menu. The control LED of the button lights up and the three-digit LED
display shows the current kit number. Then you can select the desired kit using the
[SELECT –/+] buttons.
Press [VOICE] to enter the menu VOICE. The default value corresponds to the voice number
that is assigned to the crash pad in the respective kit, e.g. ‘96’
in kit ‘001’ .
The control LED of the button lights up and the three-digit LED display shows the voice
number that is assigned to the activated pad (activation by pressing a button or hitting the
pad). Then you can select the desired voice using the [SELECT –/+] buttons.
Switching on/o, standby
Drum kit
Pad voice
Operating
MD-90
21
Mobile Drum