Data Sheet

Thomann GmbH

Hans-Thomann-Straße 1 • 96138 Burgebrach

Germany • www.thomann.de

DocID: 189020_18.07.16

MCT-10 – Professional cable tester

Features

 LED error indicator with logic and clear LED display

 For the following cable combinations:

XLR | 1/4” phone connector bal./unbal. | Speakon | RCA | DIN (5 pin)

 Battery check LED

 Incl. test prods

This device is intended to be used for cable testing. Any other use or

use under other operating conditions is considered to be improper

and may result in personal injury or property damage. No liability

will be assumed for damages resulting from improper use.

Ensure that plastic bags, packaging, etc. are properly disposed of

and are not in the reach of babies and young children. Choking haz-

ard! Ensure that children do not detach any small parts (e.g. knobs or

the like) from the product. They could swallow the pieces and choke! Never let

children use electrical devices unattended.

For the transport and protective packaging, environmentally friendly

materials have been chosen that can be supplied to normal recycling.

Ensure that plastic bags, packaging, etc. are properly disposed of. Do

not just dispose of these materials with your normal household waste, but

make sure that they are collected for recycling. Please follow the notes and

markings on the packaging.

This product is subject to the European Waste Electrical and Electronic

Equipment Directive (WEEE) in its currently valid version. Do not dis-

pose of your old device with your normal household waste. Dispose of

this product through an approved waste disposal rm or through your

local waste facility. Comply with the rules and regulations that apply in your

country. If in doubt, consult your local waste disposal facility.