Assembly instructions

1. Loosen the xing screws (22) of the mounting clamps on the lateral support tubes with the drum key (21).
2. Turn the side arms in the desired position and then re-tighten the xing screws (22) with the drum key (21).
'- -,+* , + *7
1. Attach the Tom pads (12), the multi-cable xings (11), the horizontal connecting tube clamps (10), and the cymbal joints (9)
in the order shown to the horizontal connecting tube (6).
2. Then tighten the xing screws (22) of the individual components with the drum key (21).
'
7
1. Attach the horizontal connecting tube (5) to the lateral support tubes (2, 3).
2. Then tighten the xing screws (22) with the drum key (21).
Assembly
10
HD-120
E-Drum Set