Assembly Instructions HD-120 E-Drum Set
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 17.06.
Table of contents Table of contents 1 Safety instructions.......................................................................................................................................................................................................... 5 2 Scope of delivery.............................................................................................................................................................................................................. 6 3 Assembly......
HD-120 E-Drum Set
Safety instructions 1 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
Scope of delivery 2 Scope of delivery Before you assemble your drum set, make sure the contents of package is complete according to the following list and figure. Item Qty.
Scope of delivery ö # $ % ( & (2 ×) (2 ×) ' * + (3 ×) (2 ×) 0 6 , 1 7 .
Assembly 3 Assembly Overview Loosen the fixing screws (22) of the clamps before sticking the tubes together. Mount the various elements in the specified sequence. The final positions of the components are shown in the illustration below. 2 / / - / 5 .
Assembly # $ ö ö 7 1. Attach the lateral support tubes (2, 3) to the rack foots (1). 2. Then tighten the fixing screws (22) with the drum key (21). % 7 1. Attach the horizontal connection tube (4) to the fixing clamps provided on the lateral support tubes (2, 3). 2. Then tighten the fixing screws (22) with the drum key (21). & 7 7 * & 1. Attach the side arms (5) in the provided mounting clamps on the rack. 2. Then tighten the fixing screws (22) with the drum key (21). 3.
Assembly 1. Loosen the fixing screws (22) of the mounting clamps on the lateral support tubes with the drum key (21). 2. Turn the side arms in the desired position and then re-tighten the fixing screws (22) with the drum key (21). 7 * + , - ' - , + * 1. Attach the Tom pads (12), the multi-cable fixings (11), the horizontal connecting tube clamps (10), and the cymbal joints (9) in the order shown to the horizontal connecting tube (6). 2.
Assembly ( ( 7 ) 1. Attach the holders for the cymbals (7) and the Hi-hat (8) to the joints for the cymbal and the Hi-hat (9). 2. Then tighten the fixing screws (22) with the drum key (21). / / / - . 1. Unscrew the wing nuts from the holders for the cymbals (7) and the Hi-hat (8) and take the felt washers off the holders. 2. Place the cymbals (14) as shown in the figure on the holders. 3.
Assembly 5 4 0 1 1. Hang the drumstick holder (19) in the provided rail on the side support tube (3) and store the drumsticks (20) in the drum‐ stick holder. 2. Set up the Hi-hat pedal (15) and the Bass drum pedal (16). 2 7 3 1. Put the e-drum module (17) up to the stop into the free bracket of the horizontal connection tube (6). 2. Align the e-drum module and then tighten the fixing screws (22) with the drum key (21). 3.
Assembly , , 1. Set up the rack, the pads and the cymbals according to your needs. Finally, position the Hi-hat and bass drum pedals in front of the rack and connect all trigger cables to the e-drum module. 2. Position the bass drum pedal centred under the rack. 3. Position the Hi-hat pedal to the left of the rack. 4. Use the clamp for the horizontal connection tube (10) and cable ties to attach the cables to the side support tubes to avoid tripping hazards.
Protecting the environment 4 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
