Assembly instructions

11 Setting up the drum set
For optimum playing, we don't just need tuned drums; rather, it is also necessary to
position all the drums in an optimum way. We now make all the settings that we
neglected before. The set-up that is described here is intended for right-handers. The
set-up for left-handers is a mirror image of this one. A non-slip surface like a carpet or
similar guarantees stability.
Let's start with the drum stool. Set the height such that your thighs are almost hori‐
zontal. This allows you to sit comfortably and not to tire when using the bass drum
and hi-hat pedals.
The next job is to take the snare drum stand and x the snare drum on it. To do this,
open the arms far enough to be able to reach over the bottom hoop. After this,
tighten the union nut such that the snare drum cannot fall o the stand. It is impor‐
tant to ensure that none of the three arms aects the snare or the throw-o lever.
The throw-o lever should face the drummer so that it is easy to operate.
Now set the height of the snare drum such that the hand holding the drumstick can
touch the head without hitting your thigh. A slight lean towards the drummer makes
drumming – and rimshots in particular – easier.
Now that we've tuned our bass drum, it's time to mount the bass drum pedal and the
tom racks on the bass drum shell. Let's start with the bass drum legs. The bass drum
spurs are inserted into the openings provided on the left and right sides of the bass
drum. The further the bass drum spurs are inserted, the smaller the distance between
the oor and the lower edge of the clamping rings. Let's set the bass drum spurs so
long that the distance is a nger's width. The drum shell should not lean forward or
towards the player. The bass drum spurs are locked with the screw.
Drum stool
Snare drum stand
Completing the bass drum
Setting up the drum set
18
Focus Junior Drum-Set
Drum Set