Assembly instructions
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Note
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Assembling the floor tom
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
6 Assembling the bass drum pedal
Let's concentrate on the hardware rst. You have to assemble the bass drum pedal
rst.
The at rod below the pedal must be pushed forward into the holder and then fas‐
tened with the screw.
Now you screw the beater into the holder.
NOTICE!
Do not stick the bottom end of the shaft in too far; otherwise, it could
damage the bass drum head.
You can make all the other settings later on. A separate user guide is enclosed for the
the bass drum pedal.
Assembling the bass drum pedal
12
Focus Junior Drum-Set
Drum Set