Assembly instructions
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Note
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Assembling the floor tom
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
The transparent batter head is used on the beater side. When mounting it, we pro‐
ceed in just the same way as with the resonator head. Put the head on rst and lay
the hoop on it, put the washers and claw hooks on the tension rods and screw them
on. Do not tighten them too much; only enough for the hoops not to be shifted. We'll
do everything else when we tune the drums. So that's the bass drum nished; now
we'll do the toms.
Mounting the beater head
Setting up the bass drum
Focus Drum Set
11
Drum Set