Data Sheet
DocID: 159520_11.05.17
Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
EN
DI-E Passive DI-Box
This device is intended to be used for impedance conversion and
balancing of signals from musical instruments. Any other use or use
under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed
for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are properly disposed of
and are not in the reach of babies and young children. Choking haz-
ard! Ensure that children do not detach any small parts (e.g. knobs or
the like) from the product. They could swallow the pieces and choke! Never let
children use electrical devices unattended.
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after
some time cause permanent dark stains. In case of doubt, do not put the rub-
ber feet directly on the oor, but use felt-pad oor protectors or a carpet.
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do
not just dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the notes and
markings on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dis-
pose of your old device with your normal household waste. Dispose of
this product through an approved waste disposal rm or through your
local waste facility. Comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Technical speci cations
Frequency response 10 Hz ~ 30 kHz
Load impedance > 600 Ω
Input 1/4" jack unbalanced
Link out 1/4" jack unbalanced
Output XLR balanced
Maximum input level +10 / +50 dB
Dimensions 100 x 130 x 40 mm
Weight 350 g