User manual

Follow the steps described below:
1. Unfold the feet of the tripod until the cross braces are in a horizontal position.
2. Fix this position with the safety screw on the slider to which the three feet are attached.
3. Pull out the safety cotter and loosen the locking screw on the extension tube.
4. Pull out the extension tube to the desired height and slide the safety cotter through the
corresponding grid hole.
5. Fix the position of the extension tube with the safety bolt on the extension tube.
6. Flange the speaker box on top of the extension tube. The weight of the speaker box to
be set up must not exceed the maximum centric load of 30 kg.
Setting up
Operating
BS-2011 MK II
15