Operating Instructions and Installation Instructions

1) Set the desired
temperature
Press the arrow buons to set the
desired temperature.
2) Temperature calibraon
*Should any deviaons occur between
the desired and actual temperature in
the room, it can be easily adjusted (the
heater should have been set to the same
seng for at least 12 hours in order to
be sure a calibraon is necessary).
Press the Funcon buon and use the
arrow buons (+ or –) to set the actual
temperature observed in the room.
Conrm by pressing the Funcon buon
or wait 15 seconds for automac
conrmaon.
Power indicator
When the panel heater is using power
(i.e. when it is heang), the power
indicator is lit.
EN 9 millheat.com