Operating Instructions and Installation Instructions

Assembly
EN 7 millheat.com
1.
Drill holes in the wall for holes 1 & 2.
Then drill holes in the wall for the
topmost holes (holes 3 & 4 by using B)
2.
Insert the wall plugs into the drilled
holes and aach the bracket with 4
screws
Use a tape measure and a spirit level to mount the bracket
3.
Place the heater on the lower lugs on
the bracket, then hang the heater on
the upper lugs (li the heater slightly
to align the heater with for the upper
lugs). Screw in the locking screws on
the top of the bracket (clockwise)