Operating Instructions and Installation Instructions

9) Delete a setback program
Press and hold or (depending on
which setback period you want to
cancel) for 3 seconds.
10) Calibraon of temperature
*Should any deviaons occur between the
desired and actual temperature in the room, it
can be easily adjusted (the heater should have
been set to the same seng for at least 12
hours in order to be sure a calibraon is
necessary).
Press 2 mes and use the arrow buons
(+ or –) to set the actual temperature
observed in the room. Conrm with or
wait 15 seconds for automac conrmaon.
11) Reseng the heater
Turn o the heater's main switch.
Press and hold while you turn on the
heater's main switch.
12) Memory funcon
*The heater remembers all the
temperature sengs and will
automacally return to the desired
temperature aer a power failure. If you
have changed the temperature seng
for the various setback programs, the
heater will also remember it.
EN 14 millheat.com