Operating Instructions and Installation Instructions

EN 11 millheat.com
3) Nighme setback
When you want the heater to reduce
the temperature in the evening
(applicable every evening/night from
now on) press . The display shows °C.
Enter the desired temperature for
nighme setback. Save by pressing .
Enter the desired number of hours for
nighme setback. Save by pressing .
*Control light is steady green when
the heater is in an acve setback period.
The control light is steady red when the
setback period is inacve, but has been
programmed.
4) Change setback
temperature — Dayme
Press and hold and press 3 mes.
Enter the desired temperature for
dayme setback. Save by pressing or
wait 15 seconds for automac
conrmaon.
5) Change setback
temperature — Nighme
Press and hold and press 3 mes.
Enter the desired temperature for
nighme setback. Save by pressing or
wait 15 seconds for automac
conrmaon.