Operating Instructions and Installation Instructions

1) Set the desired
temperature
Press the arrow buons to set the
desired temperature.
Note: Can only be carried out when the
setback programs are inacve
Power indicator
When the panel heater is using power
(i.e. when it is heang), the energy
indicator is lit.
EN 11 millheat.com
2) Dayme setback
When you want the heater to reduce the
temperature during the day (set for
weekdays from now on) press . The
display shows "d".
Use the arrow buons to enter the
correct weekday. (Monday=1, Tuesday=2,
Wednesday=3, Thursday=4, Friday=5,
Saturday=6, Sunday=7). Save by
pressing .
Enter the desired temperature for
dayme setback. Save by pressing .
Enter the desired number of hours for
dayme setback. Save by pressing .
*Control light is steady green when
the heater is in an acve setback period.
The control light is steady red when the
setback period is inacve, but has been
programmed.