Operating Instructions and Installation Instructions

EN 12 millheat.com
7) Cancel (skip) setback
period
Press and hold and press or
once (depending on which setback
period you want to cancel).
*The heater will skip an acve setback
period or the next setback period.
*During the next setback period, the
heater will automacally resume the
programmed temperature reducon.
8) Delete a setback program
Press and hold or (depending on
which setback period you want to
cancel) for 3 seconds.
9) Temperature calibraon
* Should any deviaons occur between
the desired and actual temperature in
the room, it can be easily adjusted (the
heater should have been set to the same
seng for at least 12 hours in order to
be sure a calibraon is necessary).
Press 2 mes and use + or − to set the
actual temperature observed in the
room. Conrm with or wait for 15
seconds for automac conrmaon.
10) Reseng the heater
Turn o the heater's main switch.
Press and hold while you turn on the
heater's main switch.
11) Memory funcon
*The heater remembers all the
temperature sengs and will
automacally return to the desired
temperature aer a power failure. If you
have changed the temperature seng
for the various setback program, the
heater will also remember it.