Use and Care Manual

DRAWER REMOVAL/ADJUSTMENT
To adjust runners from side to side, grasp
runners at rear of cabinet and slide to
desired position.
To lock drawer box back in place, set the
drawer on the runners and fully close until
you hear the ‘click’ of the runners locking
into the release tabs. Open and close
repeatedly to align runners and ensure
lock.
A
B
Partially open drawer to get access to
underneath.
Reach underneath drawer box at front
and locate runner releases on each side
of drawer box.
1 2
3
Squeeze release tabs and remove drawer
box from runners.
4 5 6
The drawer box will release from the
runners.
DRAWER FRONT ADJUSTMENT
If additional adjustment is required, loosen
screws and twist drawer front for proper
alignment. Tighten screws securely.
While drawer is locked on runners, rotate
tab to raise or lower drawer front on either
side.
1 2
SHELF PINS
Cabinet shelves feature locking shelf pins.
To release, simply push in the tab and lift the
shelf