8" x 64½" LaundryTower Assembly Guide LT18 IMPORTANT NOTES Before you start, inspect all panels and hardware to ensure you have everything needed. We recommend laying the panels on some cardboard to protect the finish when assembling. In addition to the pre-installed hardware, we recommend adding a bead of white wood glue in the dado grooves, to create the strongest cabinet. www.millspride.com/rta Scan this code for more detailed instructions, assembly videos and to register your cabinet warranty. www.
60” Laundry Wall Cabinet - LW60 PARTS N 1 x Left Lower End 1 x Right Lower with Pre-Installed End with PreHardware Installed 1 x Lower Frame with Pre-installed Hardware 1 x Upper UFrame with Preinstalled Hardware 2 x Doors 1 x Lower Back with Pre-Installed Hardware Hardware J K L 1 x Upper Back with Preinstalled Hardware M 2 x Fixed Shelves Q 2 x Adjustable Shelves 1 x Left Upper End 1 x Left Upper End with Pre-installed with Pre-installed Hardware Hardware G 2 x Silver LBrackets H I 6 x W
18" x 64½" LaundryTower - LT18 Step 1 Lay the Lower Frame (A) face down on a smooth flat surface and run a bead of glue in the vertical grooves. Step 2 Insert the Lower Ends (B and C) so that the L-Brackets on the Frame (A) and the Connector Plates on the Ends (B and C) ‘snap’ together. Align the panels so the dado grooves line up and tighten the Connector Plate screws. Then, lock the Plates and LBrackets together with (4) #6 x 1/2" Pan Head screws. www.millspride.
18" x 64½" LaundryTower - LT18 Step 3 Run beads of glue in the lower grooves in Frame (A) and Lower Ends (B and C) and insert (1) Fixed Shelf (E). Step 4 Apply beads of glue to recesses in back of Lower Ends (B and C) and groove in Lower Back (D). Carefully install Lower Back (D) so that the L-Brackets and Connector Plates 'snap' together. www.millspride.
18" x 64½" LaundryTower - LT18 Step 5 Ensure the brackets and plates are connected, insert (2) #6 x 1" Flat Head screws thru holes in Lower Back and fully tighten into Fixed Shelf (E). Step 6 Carefully turn the cabinet over and tighten the Connector Plate screws. Then, secure the brackets together using (4) #6 x 1/2" Pan Head locking screws. www.millspride.
18" x 64½" LaundryTower - LT18 Step 7 At the Toe Kick cutout, attach (2) Silver L-Brackets (G) to the Lower Ends (B and C) using (4) #8 x 1/2" Pan Head screws. Step 8 Mount the Toe Kick (F) to the Silver L-Brackets (G) using (4) #8 x 1/2" Pan Head screws. Ensure the outer edges of the Toe Kick align with the edges of the Frame (A). F www.millspride.
18" x 64½" LaundryTower - LT18 Step 9 Stand the cabinet upright and insert small daps of glue in the (6) slots in Lower Ends (B and C) and Lower Back (D) and the (4) holes in the top of Frame (A). Then, insert (6) Wood Biscuit Joints (H) and (4) Wood Connector Dowels (I). Step 10 Lay the Upper U-Frame (J) face down on a smooth flat surface and run a bead of glue in the vertical grooves. J www.millspride.
18" x 64½" LaundryTower - LT18 Step 11 Insert the Upper Ends (K and L) so that the L-Brackets on the U-Frame (J) and the Connector Plates on the Ends 'snap' together. L Align the panels and tighten the Connector Plate screws. Then, lock the brackets together using (8) #6 x 1/2" Pan Head locking screws. K J Step 12 Run beads of glue in the upper grooves in U-Frame (J) and Upper Ends (K and L) and insert (1) Fixed Shelf (E). J www.millspride.
18" x 64½" LaundryTower - LT18 Step 13 Apply beads of glue to recesses in back of Upper Ends (K and L) and groove in Upper Back (M). Carefully install Upper Back (M) so that the L-Brackets and Connector Plates 'snap' together. M K Step 14 Ensure the brackets and plates are connected, insert (2) #6 x 1" Flat Head screws thru holes in Lower Back and fully tighten into Fixed Shelf (E). M www.millspride.
18" x 64½" LaundryTower - LT18 Step 15 Carefully turn the cabinet over and tighten the Connector Plate screws. Then, secure the brackets together using (8) #6 x 1/2" Pan Head locking screws. Step 16 Insert small daps of glue into the (6) slots in the bottom edge of Upper Ends (K and L) and Upper Back (D) and in the (4) holes in the bottom of U-Frame (J). Then, carefully place the upper cabinet onto the lower cabinet, making sure the Wood Biscuit Joints and wood Dowels are fully inserted.
18" x 64½" LaundryTower - LT18 Step 17 In the back, where the two cabinet sections meet, attach the (2) tan L-Brackets to the Lower Back (D) using (2) #6 x 1/2" Pan Head screws. Then, attach the (4) loose Connector Plates to the Lower Back (D) and the Lower Frame (A) using (4) #6 x 1/2" Pan Head screws. Finally, secure the plates and brackets together using (8) #6 x 1/2" Pan Head locking screws.
18" x 64½" LaundryTower - LT18 Step 19 Lay the (2) Doors (N) face down on a smooth flat surface and install (4) Soft Close hinges (O) using (8) #6 x 5/8" Flat Head Screws. N N Step 20 Mount the (2) Doors (N) onto the Frames (A and J) using (4) #8 x 7/8" Pan Washer Head screws. www.millspride.
18" x 64½" LaundryTower - LT18 Step 21 Install Rod Socket (K) in the desired location, immediately behind the Frame (A), using the screws provided. Step 22 To install the Adjustable Hanging Rod (S) between (2) towers, insert the rod into one socket, extend the rod into the other bracket, and twist it to lock in place. IMPORTANT! Consult a professional to determine the best hardware required to mount the tower securely to your type of wall. www.millspride.
