Technical Specifications

BLUE MONSTER
®
Nickel Anti-Seize Sealant
Lubricant and Thread Sealant
Color/Consistency
Nickel
Flash Point: 515°F (268°C)
NLGI Consistency: 2
Sulphur Typical: 0.5%
Worked Penetration: 290-310
Coefficient of Friction: 0.1
Drying Time
The system may be pressurized immediately after
assembly. Non-hardening.
Temperature Range Use
Gases: 0°F (-17°C) to + 2600°F (1427°C)
Liquids: 0°F (-17°C) to + 2600°F (1427°C)
Brushable to: 10°F (-12°C)
Pour Point: 32°F (0°C)
Pressure Range Use
Gases: up to 3,000 PSI (435 kPa)
Liquids: up to 10,000 PSI (1450 kPa)
Corrosiveness
Mill-Rose Blue Monster Nickel Anti-Seize is non-
corrosive, and prevents the corrosion and seizing
of threads.
U.S. Federal Specifications
Mill-Rose Blue Monster Nickel Anti-Seize meets
and exceeds MIL-A-907D.
Environmental Statement
Mill-Rose Blue Monster Nickel Anti-Seize is
formulated with inorganic grease and is free from
any lead containing ingredients.
Directions For Use
1. Remove all dust, grease, oil, and any foreign material from
mating surfaces.
2. Apply Mill-Rose Blue Monster Nickel Anti-Seize lubricant and
thread sealant to mating surfaces and assemble.
3. Keep container closed at all times when not in use to
avoid contamination.
4. Do not use on oxygen systems
5. Requires no thinners.
The Mill-Rose Company • Clean-Fit Products
7310 Corporate Blvd., Mentor, OH 44060
To order call toll-free: [phone] or Fax [phone]
Visit our web site at www.CleanFit.com • E-mail: [e-mail]