Technical Specifications

Seals threads on all Metals, PVC, CPVC,
ABS and Nylon Plastic Pipe Systems
Heavy-Duty Industrial Grade with PTFE
BLUE MONSTER Industrial Grade PTFE enriched Pipe Thread
Compound is a slow-drying, soft-setting, non-hardening pipe thread
compound. Blue Monster has a high bulk density, which means
there are more solids in the formulation. This allows you to work
the product into the valley of the threads giving you greater sealing
capabilities to fill any voids that occur under different tolerances of
pipe and fittings. Blue Monster with PTFE is recommended for on-site
or assembly line work. It is lead-free, non-toxic and will not harden or
separate in the can.
When applied properly, Blue Monster allows the system to be
pressurized immediately after assembly. It does not require any
set or cure time. This compound is made with the highest quality
materials. All information provided is based on our laboratory testing,
independent laboratory test results and actual field experience.
Blue Monster PTFE pipe thread sealant is formulated with
PTFE resin, a polymer consisting of recurring tetrafluoroethylene
monomers whose formula is (CF
2
-CF
2
)n. It is inert and compatible
with a very wide range of materials. Use Blue Monster on threads
made from all metals, PVC, CPVC, ABS and nylon plastic pipe systems.
• Heavy-Duty Industrial Grade
• Specially formulated for
production line use
• Adheres to oily threads
Meets Mil. Spec. TT-S-1732
Brushable from -50ºF (-45ºC) to +400ºF (204ºC)
Pressure ratings: Gases up to 3,000 PSI (435 kPa)
Liquids up to 10,000 PSI (1,450 kPa)
Industrial Grade
PTFE Pipe Thread Sealant
pw/dwv/sw
Standard 14
Standard 61
• Non-hardening
• Non-toxic
• Slow-Drying
• Easy-cleanup
• Soft-Set
• Grit-Free
• Low-Odor
• Acids, Dilute
• Air, Compressed
• Aliphatic Solvents
• Alkalis, Dilute
• Ammonia
• Brine
• Butane
• Carbon Dioxide
• Castor Oils
• Chlorinated Water
• Coal Tar Naptha
• Corrosives
• Cutting Oils
• Diesel Fuel Oil
• Fatty Acids
• Freons (All)
• Gasohol
• Gasoline
• Glycol
• Heating Oils
• Helium, Gaseous
• Hydraulic Oils
• Hydrogen
• Inert Gases
• Jet Fuel
• Kerosene
• Lacquer
• Liquified Petroleum Gases
• Mineral Oils
• Naptha
• Natural Gas
• Nitrogen Gas
• Petroleum Solvents
• Propane
• Refrigeration Gases
• Soap, Liquid
• Steam Lines
• Sugar, Liquid
• Vegetable Oils
• Water, Potable
• Xylol
Blue Monster can be used on pipes carrying the following:
For Material Safety Data Sheets, contact
Mill-Rose or download directly from the
Mill-Rose Clean-Fit website.
Formulated for
extra lubrication on metal pipe threads.
Requirements certified to CSA requirements No. 4-90 metal
threads only, plus 1250º F to -400º F, 125 PSIG
for use with natural and LP (vapor state) gases only.
Not recommended for use on oxygen systems. Use Clean-Fit 3-wrap
Oxygen PTFE Tape
BLUE MONSTER
™
Thread Sealant
The Mill-Rose Company • Clean-Fit Products
7310 Corporate Blvd., Mentor, OH 44060
To order call toll-free: [phone] or Fax [phone]
Visit our web site at www.CleanFit.com • E-mail: [e-mail]
Cat # Size Case Pack Weight
76001 1/4 pint / 4 fl. oz. / 118 ml 24 15 lbs
76003 1/2 pint / 8 fl. oz. / 237 ml 24 23 lbs
76005 1 pint / 16 fl. oz. / 473 ml 12 22 lbs
76017 1 quart / 32 fl. oz. / .95 liter 12 42 lbs.