User's Manual

MWC711 User Manual

Miliwave

3 / 5

1.Introduction

1.1 Overview

Miliwave’s MWC711 module operates in the 60GHz unlicensed frequency band, IEEE802.11ad

compliant, and is designed for Point to Multi-Pont (PTMP) or Point to Point (PTP) bridge wireless

communication, primarily for Line-of Sight (LOS) operation.The MWC711 module connects to a Linux

based Host Communication Processor board via an available USB 3.0 port . All required drivers and

firmware is pre-installed on the MWC711 module as a self-contained device . However, the MC711 module

would not be operational unless it is connected to the Linux-based Host Communication Processor board

for PTP or PTMP bridge wireless communication.

For more information, please contact your Miliwave (sales@miliwave.co.kr)

1.2 Abbreviations and Acronym Definitions

Acronym

Definition

Gbps Giga bits per second

GHz Giga Hertz

IEEE Institute of Electrical and Electronics Engineers

LED Light Emitting Diode

LoS line-of-sight

Mbps Mega bits per second

MCS Modulation and Coding Scheme

MHz Mega Hertz

PTMP Point-to-multipoint Communication

QAM Quadrature amplitude modulation