User Manual

Install MiLight lights

MiLight lights work a bit different than your ordinary light bulbs. Ordinary light bulbs can only switch on and off by the

light switch on the wall while MiLight lights have many more features and therefore CAN ONLY work with a remote

control.

When you install the MiLight lights and switch on the light switch then you will find out that the MiLight lights don’t

react to the remote control yet. The MiLight lights and the remote control need to get ‘linked’ just like a Bluetooth

speaker and your telephone need to get paired first so that they can communicate with each other. The same applies

for the MiLight lights and the remote control of your choice.

How to pair / link MiLight lights with the remote control

You can install all your MiLight lights in 1 group but then all the lights will react as 1 group. So if you have installed

MiLight lights in your living room, dining room and bedroom then all the lights will dim or go to blue color if you tell the

remote control to do that.

One of the features of MiLight lights is that you can set up groups / zones. With this you can switch off the lights in

your bedroom, dim the lights in a warm color in the living room but have bright light in the dining room just by using

the remote control.

Let’s take above house as example and read how to pair the lights.

 Switch off the wall light switch(es) in Zone 1

 Install the MiLight lights

 Switch on the wall light switch(es) in Zone 1

 After the lights are turned on click WITHIN 3 seconds 3 times on the | button of Zone 1 on the remote control

(see above remote control)

 After successful pairing all the MiLight lights in Zone 1 will blink 3 times slowly.

Repeat these steps for Zone 2 but then click 3 times on the | button of Zone 2 on the remote control. Repeat the

same steps for Zone 3 and 4 with their corresponding button on the remote control.

PAGE 1
Install MiLight lights MiLight lights work a bit different than your ordinary light bulbs. Ordinary light bulbs can only switch on and off by the light switch on the wall while MiLight lights have many more features and therefore CAN ONLY work with a remote control. When you install the MiLight lights and switch on the light switch then you will find out that the MiLight lights don’t react to the remote control yet.
PAGE 2
How to unpair / unlink MiLight lights with the remote control In case you want to make another zone setting in your house or you are moving to another house and want to bring your MiLight lights with you, you better set the MiLight lights back to ‘factory settings’. To make the MiLight lights free again from their remote control you need to unpair / unlink the MiLight lights again.