Manual

XProtect® Bosch Intuikey Keyboard Smart Client Plug-in
www.milestonesys.com Page 14 Default Settings
Default Settings
Default settings can be activated by pressing the “Default settings” button from the Setup Form.
The default setting including:
• COM Port: “COM1”.
• Baud: 19200, Parity: None, Data bits: 8, Stop Bits: 1, and Handshake: None
• Generic actions (number 1- 12):
o all not assigned
• Bosch Intuikey spec:
o ENTER - Select Generic number.
o MON – Select monitor by number(shortcut)
o IRIS_PLUS – Iris up on selected camera
o IRSI_MINUS – Iris down on selected camera
o SHOT – Select camera by number(shortcut)
o FOCUS_PLUS – Focus near on selected camera
o FOCUS_MINUS – Focus far on selected camera
o CLR – Focus stop
o LEFTSOFTKEY1 -- Reverse playback
o RIGHTSOFTKEY1 – Forward playback
o LEFTSOFTKEY2 -- Play/Stop
o LEFTSOFTKEY3 – Previous image
o RIGHTSOFTKEY3 – Next image
o LEFTSOFTKEY4 – First image
o RIGHTSOFTKEY4 – Last image
o LEFTSOFTKEY6 – Show Live
o RIGHTSOFTKEY6 – Show Playback
o LEFTSOFTKEY7 – Show Setup
o PTZ – default joystick move motions such as pan left/right/stop, tile up/down/stop, and zoom
in/out